TPU 95A 3D Print Cost Calculator

Deterministic digital manufacturing cost engine pre-configured for TPU 95A. Accurately calculates material expenditure ($0.035/g), printer electricity, machine wear, operator labor, and commercial profit margins.

Preset Printer

Preset Material

Filament Diameter

Material Used

grams

Direct mass ≈ 41.2m (1.75mm)

Spool / Stock Price

Print Duration

hours

Printer Power

watts

Electricity Rate

$ /kWh

Printer Machine Cost

Labor Hourly Rate

$ /hr

Labor Prep/Post Time

mins

Failure Risk Buffer

Commercial Quote & Margin Engine

Calculate retail client selling price and estimated profit.

Target Profit Margin

40%

Suggested Retail Quote $19.94

Net Estimated Profit +$7.98

Total Manufacturing Cost

$11.97

Includes 8% risk buffer on $11.08 subtotal

Cost Distribution Subtotal: $11.08

Material (37.9%)

Electricity (1%)

Depreciation (4.7%)

Labor (56.4%)

Material $4.20

Electricity $0.11

Depreciation $0.52

Labor $6.25

TPU 95A Pricing & Physical Specifications

Category: Filament

Density: 1.21 g/cm³

Standard Spool / Size: 1000 g

Stock Spool Price: $34.99

Cost per Gram: $0.035 / g

Cost per Kilogram: $34.99 / kg

TPU 95A Raw Material Cost Reference Table

Pre-calculated

Estimated raw polymer expenditure and 1.75mm linear filament length at $34.99 per 1000g spool.

Print Weight	1.75mm Length	Raw Material Cost	Typical Print Example
15 g	5.15 m	$0.52	Miniature / Cable Clip
50 g	17.18 m	$1.75	Small Bracket / Phone Stand
120 g	41.23 m	$4.20	Mechanical Enclosure
250 g	85.9 m	$8.75	Large Functional Part
500 g	171.8 m	$17.50	Half-Spool Batch
1000 g	343.6 m	$34.99	Full 1kg Spool

Spool Tare & Length TPU 95A Weight to Length →

Calculate remaining spool meters, deduct empty spool tare weight, and check print job fit.

Extrusion Limits Volumetric Flow Rate Calculator →

Determine maximum extrusion speeds before underextrusion or nozzle clogging occurs.

Frequently Asked Questions

How much does TPU 95A cost per gram?

At a standard retail price of $34.99 for a 1000g spool, TPU 95A costs approximately $0.035 per gram ($34.99 per kilogram).

How much does a typical 100-gram print cost in TPU 95A?

A 100-gram print using TPU 95A costs $3.50 in raw polymer. Factoring in average electricity ($0.03–$0.06/hr), machine depreciation ($0.15–$0.25/hr), and an 8% failure buffer, a typical 4-hour print will cost approximately $4.95 in total manufacturing cost.

How do I quote commercial 3D prints using TPU 95A?

To calculate a client quotation price for TPU 95A: combine raw material cost, electricity draw, hardware depreciation, and operator labor prep time. Then apply a 40% to 65% retail profit margin (or a 2.5x to 3.0x markup multiplier) using the commercial pricing engine above.

How do I calculate TPU 95A cost from sliced filament length (meters)?

To calculate filament cost from slicer meters: at 1.75mm diameter, 1 meter of TPU 95A weighs approximately 2.91 grams, costing approximately $0.102 per linear meter.

Compare with Related Filaments

ABS $21.99 / 1000g ASA $34.99 / 1000g Glow-in-the-Dark PLA $27.99 / 1000g High-Speed PLA (Hyper PLA) $24.99 / 1000g