Elegoo Mars 5 Ultra Print Cost Calculator
Digital manufacturing cost model for the Elegoo Mars 5 Ultra (SLA). Covers typical power draw (~60W), machine depreciation ($0.090/hr), material usage, and commercial quoting margins.
Commercial Quote & Margin Engine
Calculate retail client selling price and estimated profit.
Elegoo Mars 5 Ultra Hardware Specifications
Build volume is taken from published slicer profiles. Power draw is a class-based estimate for this size and category of machine, not a manufacturer rating. Service life is a class-based assumption for this size and category of machine, not a manufacturer rating. The price shown is an estimate for this class of machine, not a researched figure or an official MSRP.
Understanding Elegoo Mars 5 Ultra Running Costs
How SLA affects the numbers
Resin printers are unusual in that power draw barely moves with print size. The LCD panel and UV array run at an essentially fixed load whether the plate holds one part or fifty, so filling the build plate is close to free in energy terms. The consumable that actually matters is the LCD itself, which is a wear item measured in hundreds of hours.
Motion system: Cartesian
A bedslinger moves the plate back and forth on the Y axis, which puts a practical ceiling on acceleration: past a certain speed the part itself becomes the thing being thrown around. For quoting that means print times scale fairly predictably with part height and layer count, but tall, narrow parts are the risk case — the taller the part, the more the moving bed works against it, and a toppled print late in a long job is the classic cause of an unbudgeted reprint.
Power draw: 60 W
At under 100 W this machine consumes less power than a typical desktop computer. Electricity is effectively a rounding error in your quotes — at ordinary residential rates a full day of printing costs less than a cup of coffee. Depreciation and your own labor will dominate the true cost of every part.
No heated chamber: what it can print
This machine has no actively heated chamber, so the bed is the only meaningful heater and the energy line on a typical job stays low. That is a materials constraint before it is a cost one: PLA, PETG and TPU are comfortable, while ABS, ASA and polycarbonate are warp-prone on large parts. If the machine is enclosed, passive heat retained from the bed helps considerably and many people run ABS successfully; on an open frame the failure rate on big parts in those materials is high enough that the usual 8–10% buffer understates the real risk.
What dominates the hourly rate
At this page’s default rate of $0.16/kWh, depreciation is the larger share of this machine’s hourly rate, so the assumed lifespan drives your cost more than your electricity tariff does. If you service the machine well and expect to exceed the default hours, raise the lifespan figure in the calculator — it will lower your quoted cost more than any energy saving could.
Quoting at this price point
In the budget tier the purchase price is low enough that depreciation per hour is almost negligible. The economics tend to favor simply running the machine hard and replacing it, rather than investing heavily in repairs. Where budget machines cost you is in time: more tuning, more failed prints, more hands-on attention — none of which appears on the electricity bill but all of which belongs in a commercial quote.
Owning an Elegoo machine
Budget-tier machines earn their price by leaving the tuning to you. Spare parts are cheap and widely available, which keeps repair costs down, but stock profiles are conservative and the first few weeks usually involve real setup time. If this is a production machine rather than a hobby one, count that setup as a one-off cost and keep an eye on the failure rate you actually observe — it is the number most likely to differ from the default assumed here.
Build volume: 1,944 cm³
The compact build envelope favors small, detailed parts and makes this machine well suited to batching many little components in a single job. Because the heated area is small, warm-up is quick and per-hour energy cost stays low — but larger parts will need splitting and joining, and that assembly time belongs in your labor estimate.
Elegoo Mars 5 Ultra Operating Cost by Print Duration
Pre-calculatedEstimated electricity cost (at $0.16/kWh) and hardware depreciation over print duration. Excludes material and labor.
| Print Duration | Energy (kWh) | Electricity Cost | Depreciation | Total Machine Cost |
|---|---|---|---|---|
| 1 Hour | 0.06 kWh | $0.01 | $0.09 | $0.10 |
| 4 Hours | 0.24 kWh | $0.04 | $0.36 | $0.40 |
| 8 Hours | 0.48 kWh | $0.08 | $0.72 | $0.80 |
| 12 Hours | 0.72 kWh | $0.12 | $1.08 | $1.20 |
| 24 Hours | 1.44 kWh | $0.23 | $2.15 | $2.38 |
| 100 Hours | 6 kWh | $0.96 | $8.97 | $9.93 |
Frequently Asked Questions
How much electricity does the Elegoo Mars 5 Ultra use?
The Elegoo Mars 5 Ultra runs at a typical draw of roughly 60 watts during active printing. Power draw is a class-based estimate for this size and category of machine, not a manufacturer rating. At the standard residential electricity rate of $0.16 per kWh, running this printer costs approximately $0.010 per hour in power. A 10-hour print consumes ~0.60 kWh (about $0.10 in electricity).
What is the depreciation rate for the Elegoo Mars 5 Ultra?
At an estimated street price of $269 and an assumed service life of 3,000 printing hours, the machine depreciation rate works out to roughly $0.090 per operating hour. Including this in your print quotes ensures hardware replacement and maintenance costs are recovered.
What is the combined machine running cost per hour for the Elegoo Mars 5 Ultra?
Combining estimated power consumption ($0.010/hr) and equipment depreciation ($0.090/hr), the baseline operating cost for the Elegoo Mars 5 Ultra works out to roughly $0.10 per hour (excluding raw filament/resin and operator labor).
Is electricity or depreciation the bigger cost on the Elegoo Mars 5 Ultra?
At this page’s default rate of $0.16/kWh, depreciation is the larger share of this machine’s hourly rate, so the assumed lifespan drives your cost more than your electricity tariff does. If you service the machine well and expect to exceed the default hours, raise the lifespan figure in the calculator — it will lower your quoted cost more than any energy saving could.
What should I know about running the Elegoo Mars 5 Ultra (SLA) commercially?
At under 100 W this machine consumes less power than a typical desktop computer. Electricity is effectively a rounding error in your quotes — at ordinary residential rates a full day of printing costs less than a cup of coffee. Depreciation and your own labor will dominate the true cost of every part. In the budget tier the purchase price is low enough that depreciation per hour is almost negligible. The economics tend to favor simply running the machine hard and replacing it, rather than investing heavily in repairs. Where budget machines cost you is in time: more tuning, more failed prints, more hands-on attention — none of which appears on the electricity bill but all of which belongs in a commercial quote.
How does the Elegoo Mars 5 Ultra's Cartesian motion system affect print cost?
A bedslinger moves the plate back and forth on the Y axis, which puts a practical ceiling on acceleration: past a certain speed the part itself becomes the thing being thrown around. For quoting that means print times scale fairly predictably with part height and layer count, but tall, narrow parts are the risk case — the taller the part, the more the moving bed works against it, and a toppled print late in a long job is the classic cause of an unbudgeted reprint.
Can the Elegoo Mars 5 Ultra print ABS or polycarbonate without a heated chamber?
This machine has no actively heated chamber, so the bed is the only meaningful heater and the energy line on a typical job stays low. That is a materials constraint before it is a cost one: PLA, PETG and TPU are comfortable, while ABS, ASA and polycarbonate are warp-prone on large parts. If the machine is enclosed, passive heat retained from the bed helps considerably and many people run ABS successfully; on an open frame the failure rate on big parts in those materials is high enough that the usual 8–10% buffer understates the real risk.
How do I calculate commercial quotes for 3D prints on a Elegoo Mars 5 Ultra?
To calculate a profitable quote: (1) calculate filament or resin consumed, (2) add the machine operating cost (~$0.10/hr × print time), (3) add labor preparation time, (4) apply an 8%–10% risk buffer for print failures, and (5) apply your target retail profit margin (typically 40%–60%).
Calculate maximum melt zone limits (mm³/s) to prevent underextrusion on high-speed prints.
Material Densities Filament Weight & Length Directory →Look up densities and spool tare deductions for PLA, PETG, ABS, and engineering polymers.