ASA Weight to Length Calculator
Acrylonitrile Styrene Acrylate is UV-stable and weather-resistant, engineered for outdoor fixtures and automotive exterior components.
ASA Technical Specifications
ASA Spool Weight to Length Reference Table
Pre-calculatedStandard physical spool conversions for ASA at 1.07 g/cm³ density.
| Spool Weight | 1.75mm Length (m) | 1.75mm Length (ft) |
|---|---|---|
| 100 g (100g) | 38.86 m | 127.5 ft |
| 250 g (250g) | 97.14 m | 318.7 ft |
| 500 g (500g) | 194.28 m | 637.4 ft |
| 750 g (750g) | 291.41 m | 956.1 ft |
| 1000 g (1 kg) | 388.55 m | 1274.8 ft |
| 2500 g (2.5 kg) | 971.38 m | 3186.9 ft |
| 5000 g (5 kg) | 1942.76 m | 6373.9 ft |
Frequently Asked Questions
How many meters of ASA filament are in a 1kg spool?
A standard 1,000g (1 kg) spool of 1.75mm ASA filament (density 1.07 g/cm³) contains approximately 388.55 meters (~1275 feet). For 2.85mm diameter, a 1 kg spool yields approximately 146.5 meters.
What is the density of ASA 3D printer filament?
ASA has an average density of 1.07 g/cm³. Heavier composite filaments yield fewer meters per kilogram than lightweight unfilled polymers.
How do I calculate remaining ASA on a used spool?
Weigh your spool on a digital scale in grams, subtract the tare weight of the empty spool (typically 130g–240g depending on brand), and enter the net filament weight into the MakersMetric calculator above to find the exact remaining meters.
What print temperatures are recommended for ASA?
Recommended nozzle extrusion temperature is 240-260 °C, with a recommended print bed temperature of 90-110 °C.
Calculate filament cost, kWh electricity, and machine depreciation for ASA jobs.
Speed TuningVolumetric Flow Rate Calculator →Check hotend melt rate limits (mm³/s) to prevent underextrusion at high speeds.