MakersMetric

PETG-CF (Carbon Fiber) 3D Print Cost Calculator

Deterministic digital manufacturing cost engine pre-configured for PETG-CF (Carbon Fiber). Accurately calculates material expenditure ($0.033/g), printer electricity, machine wear, operator labor, and commercial profit margins.

Filament Diameter
grams
Direct mass ≈ 38.7m (1.75mm)
$
hours
watts
$ /kWh
$
$ /hr
mins
%

Commercial Quote & Margin Engine

Calculate retail client selling price and estimated profit.

40%
Suggested Retail Quote $19.51
Net Estimated Profit +$7.81
Total Manufacturing Cost
$11.71
Includes 8% risk buffer on $10.84 subtotal
Cost Distribution Subtotal: $10.84
Material (36.5%)
Electricity (1%)
Depreciation (4.8%)
Labor (57.7%)
Material $3.96
Electricity $0.11
Depreciation $0.52
Labor $6.25

PETG-CF (Carbon Fiber) Pricing & Physical Specifications

Category: Filament
Density: 1.29 g/cm³
Standard Spool / Size: 1000 g
Stock Spool Price: $32.99
Cost per Gram: $0.033 / g
Cost per Kilogram: $32.99 / kg

PETG-CF (Carbon Fiber) Raw Material Cost Reference Table

Pre-calculated

Estimated raw polymer expenditure and 1.75mm linear filament length at $32.99 per 1000g spool.

Print Weight1.75mm LengthRaw Material CostTypical Print Example
15 g4.83 m$0.49Miniature / Cable Clip
50 g16.11 m$1.65Small Bracket / Phone Stand
120 g38.67 m$3.96Mechanical Enclosure
250 g80.57 m$8.25Large Functional Part
500 g161.14 m$16.50Half-Spool Batch
1000 g322.29 m$32.99Full 1kg Spool
Spool Tare & Length PETG-CF (Carbon Fiber) Weight to Length →

Calculate remaining spool meters, deduct empty spool tare weight, and check print job fit.

 Extrusion Limits Volumetric Flow Rate Calculator →

Determine maximum extrusion speeds before underextrusion or nozzle clogging occurs.

Frequently Asked Questions

How much does PETG-CF (Carbon Fiber) cost per gram?

At a standard retail price of $32.99 for a 1000g spool, PETG-CF (Carbon Fiber) costs approximately $0.033 per gram ($32.99 per kilogram).

How much does a typical 100-gram print cost in PETG-CF (Carbon Fiber)?

A 100-gram print using PETG-CF (Carbon Fiber) costs $3.30 in raw polymer. Factoring in average electricity ($0.03–$0.06/hr), machine depreciation ($0.15–$0.25/hr), and an 8% failure buffer, a typical 4-hour print will cost approximately $4.75 in total manufacturing cost.

How do I quote commercial 3D prints using PETG-CF (Carbon Fiber)?

To calculate a client quotation price for PETG-CF (Carbon Fiber): combine raw material cost, electricity draw, hardware depreciation, and operator labor prep time. Then apply a 40% to 65% retail profit margin (or a 2.5x to 3.0x markup multiplier) using the commercial pricing engine above.

How do I calculate PETG-CF (Carbon Fiber) cost from sliced filament length (meters)?

To calculate filament cost from slicer meters: at 1.75mm diameter, 1 meter of PETG-CF (Carbon Fiber) weighs approximately 3.10 grams, costing approximately $0.102 per linear meter.

Compare with Related Filaments

ABS $21.99 / 1000gASA $34.99 / 1000gGlow-in-the-Dark PLA $27.99 / 1000gHigh-Speed PLA (Hyper PLA) $24.99 / 1000g