PETG-CF (Carbon Fiber) Weight to Length Calculator
Carbon fiber reinforced PETG combining weather and chemical resistance with enhanced mechanical rigidity and low shrinkage.
PETG-CF (Carbon Fiber) Technical Specifications
PETG-CF (Carbon Fiber) Spool Weight to Length Reference Table
Pre-calculatedStandard physical spool conversions for PETG-CF (Carbon Fiber) at 1.29 g/cm³ density.
| Spool Weight | 1.75mm Length (m) | 1.75mm Length (ft) |
|---|---|---|
| 100 g (100g) | 32.23 m | 105.7 ft |
| 250 g (250g) | 80.57 m | 264.3 ft |
| 500 g (500g) | 161.14 m | 528.7 ft |
| 750 g (750g) | 241.72 m | 793 ft |
| 1000 g (1 kg) | 322.29 m | 1057.4 ft |
| 2500 g (2.5 kg) | 805.72 m | 2643.4 ft |
| 5000 g (5 kg) | 1611.44 m | 5286.9 ft |
Frequently Asked Questions
How many meters of PETG-CF (Carbon Fiber) filament are in a 1kg spool?
A standard 1,000g (1 kg) spool of 1.75mm PETG-CF (Carbon Fiber) filament (density 1.29 g/cm³) contains approximately 322.29 meters (~1057 feet). For 2.85mm diameter, a 1 kg spool yields approximately 121.52 meters.
What is the density of PETG-CF (Carbon Fiber) 3D printer filament?
PETG-CF (Carbon Fiber) has an average density of 1.29 g/cm³. Heavier composite filaments yield fewer meters per kilogram than lightweight unfilled polymers.
How do I calculate remaining PETG-CF (Carbon Fiber) on a used spool?
Weigh your spool on a digital scale in grams, subtract the tare weight of the empty spool (typically 130g–240g depending on brand), and enter the net filament weight into the MakersMetric calculator above to find the exact remaining meters.
What print temperatures are recommended for PETG-CF (Carbon Fiber)?
Recommended nozzle extrusion temperature is 230-260 °C, with a recommended print bed temperature of 70-85 °C.
Calculate filament cost, kWh electricity, and machine depreciation for PETG-CF (Carbon Fiber) jobs.
Speed TuningVolumetric Flow Rate Calculator →Check hotend melt rate limits (mm³/s) to prevent underextrusion at high speeds.