PETG-ESD (Electrostatic Discharge Safe) 3D Print Cost Calculator

Deterministic digital manufacturing cost engine pre-configured for PETG-ESD (Electrostatic Discharge Safe). Accurately calculates material expenditure ($0.045/g), printer electricity, machine wear, operator labor, and commercial profit margins.

Preset Printer

Preset Material

Filament Diameter

Material Used

grams

Direct mass ≈ 39.0m (1.75mm)

Spool / Stock Price

Print Duration

hours

Printer Power

watts

Electricity Rate

$ /kWh

Printer Machine Cost

Labor Hourly Rate

$ /hr

Labor Prep/Post Time

mins

Failure Risk Buffer

Commercial Quote & Margin Engine

Calculate retail client selling price and estimated profit.

Target Profit Margin

40%

Suggested Retail Quote $22.10

Net Estimated Profit +$8.84

Total Manufacturing Cost

$13.26

Includes 8% risk buffer on $12.28 subtotal

Cost Distribution Subtotal: $12.28

Material (44%)

Electricity (0.9%)

Depreciation (4.3%)

Labor (50.9%)

Material $5.40

Electricity $0.11

Depreciation $0.52

Labor $6.25

PETG-ESD (Electrostatic Discharge Safe) Pricing & Physical Specifications

Category: Filament

Density: 1.28 g/cm³

Standard Spool / Size: 1000 g

Stock Spool Price: $44.99

Cost per Gram: $0.045 / g

Cost per Kilogram: $44.99 / kg

PETG-ESD (Electrostatic Discharge Safe) Raw Material Cost Reference Table

Pre-calculated

Estimated raw polymer expenditure and 1.75mm linear filament length at $44.99 per 1000g spool.

Print Weight	1.75mm Length	Raw Material Cost	Typical Print Example
15 g	4.87 m	$0.67	Miniature / Cable Clip
50 g	16.24 m	$2.25	Small Bracket / Phone Stand
120 g	38.98 m	$5.40	Mechanical Enclosure
250 g	81.2 m	$11.25	Large Functional Part
500 g	162.4 m	$22.50	Half-Spool Batch
1000 g	324.81 m	$44.99	Full 1kg Spool

Spool Tare & Length PETG-ESD (Electrostatic Discharge Safe) Weight to Length →

Calculate remaining spool meters, deduct empty spool tare weight, and check print job fit.

Extrusion Limits Volumetric Flow Rate Calculator →

Determine maximum extrusion speeds before underextrusion or nozzle clogging occurs.

Frequently Asked Questions

How much does PETG-ESD (Electrostatic Discharge Safe) cost per gram?

At a standard retail price of $44.99 for a 1000g spool, PETG-ESD (Electrostatic Discharge Safe) costs approximately $0.045 per gram ($44.99 per kilogram).

How much does a typical 100-gram print cost in PETG-ESD (Electrostatic Discharge Safe)?

A 100-gram print using PETG-ESD (Electrostatic Discharge Safe) costs $4.50 in raw polymer. Factoring in average electricity ($0.03–$0.06/hr), machine depreciation ($0.15–$0.25/hr), and an 8% failure buffer, a typical 4-hour print will cost approximately $5.95 in total manufacturing cost.

How do I quote commercial 3D prints using PETG-ESD (Electrostatic Discharge Safe)?

To calculate a client quotation price for PETG-ESD (Electrostatic Discharge Safe): combine raw material cost, electricity draw, hardware depreciation, and operator labor prep time. Then apply a 40% to 65% retail profit margin (or a 2.5x to 3.0x markup multiplier) using the commercial pricing engine above.

How do I calculate PETG-ESD (Electrostatic Discharge Safe) cost from sliced filament length (meters)?

To calculate filament cost from slicer meters: at 1.75mm diameter, 1 meter of PETG-ESD (Electrostatic Discharge Safe) weighs approximately 3.08 grams, costing approximately $0.139 per linear meter.

Compare with Related Filaments

ABS $21.99 / 1000g ASA $34.99 / 1000g Glow-in-the-Dark PLA $27.99 / 1000g High-Speed PLA (Hyper PLA) $24.99 / 1000g