PETG-ESD (Electrostatic Discharge Safe) Weight to Length Calculator
Conductive carbon nanotube-doped PETG preventing static discharge, certified for cleanroom electronics tooling and PCB test fixtures.
PETG-ESD (Electrostatic Discharge Safe) Technical Specifications
PETG-ESD (Electrostatic Discharge Safe) Spool Weight to Length Reference Table
Pre-calculatedStandard physical spool conversions for PETG-ESD (Electrostatic Discharge Safe) at 1.28 g/cm³ density.
| Spool Weight | 1.75mm Length (m) | 1.75mm Length (ft) |
|---|---|---|
| 100 g (100g) | 32.48 m | 106.6 ft |
| 250 g (250g) | 81.2 m | 266.4 ft |
| 500 g (500g) | 162.4 m | 532.8 ft |
| 750 g (750g) | 243.6 m | 799.2 ft |
| 1000 g (1 kg) | 324.81 m | 1065.6 ft |
| 2500 g (2.5 kg) | 812.02 m | 2664.1 ft |
| 5000 g (5 kg) | 1624.03 m | 5328.2 ft |
Frequently Asked Questions
How many meters of PETG-ESD (Electrostatic Discharge Safe) filament are in a 1kg spool?
A standard 1,000g (1 kg) spool of 1.75mm PETG-ESD (Electrostatic Discharge Safe) filament (density 1.28 g/cm³) contains approximately 324.81 meters (~1066 feet). For 2.85mm diameter, a 1 kg spool yields approximately 122.46 meters.
What is the density of PETG-ESD (Electrostatic Discharge Safe) 3D printer filament?
PETG-ESD (Electrostatic Discharge Safe) has an average density of 1.28 g/cm³. Heavier composite filaments yield fewer meters per kilogram than lightweight unfilled polymers.
How do I calculate remaining PETG-ESD (Electrostatic Discharge Safe) on a used spool?
Weigh your spool on a digital scale in grams, subtract the tare weight of the empty spool (typically 130g–240g depending on brand), and enter the net filament weight into the MakersMetric calculator above to find the exact remaining meters.
What print temperatures are recommended for PETG-ESD (Electrostatic Discharge Safe)?
Recommended nozzle extrusion temperature is 230-260 °C, with a recommended print bed temperature of 75-85 °C.
Calculate filament cost, kWh electricity, and machine depreciation for PETG-ESD (Electrostatic Discharge Safe) jobs.
Speed TuningVolumetric Flow Rate Calculator →Check hotend melt rate limits (mm³/s) to prevent underextrusion at high speeds.