Nylon PA-12 Weight to Length Calculator
Polyamide 12 known for ultra-low moisture absorption, high tensile elongation, fatigue endurance, and chemical resistance.
Nylon PA-12 Technical Specifications
Nylon PA-12 Spool Weight to Length Reference Table
Pre-calculatedStandard physical spool conversions for Nylon PA-12 at 1.01 g/cm³ density.
| Spool Weight | 1.75mm Length (m) | 1.75mm Length (ft) |
|---|---|---|
| 100 g (100g) | 41.16 m | 135 ft |
| 250 g (250g) | 102.91 m | 337.6 ft |
| 500 g (500g) | 205.82 m | 675.3 ft |
| 750 g (750g) | 308.73 m | 1012.9 ft |
| 1000 g (1 kg) | 411.64 m | 1350.5 ft |
| 2500 g (2.5 kg) | 1029.09 m | 3376.3 ft |
| 5000 g (5 kg) | 2058.18 m | 6752.6 ft |
Frequently Asked Questions
How many meters of Nylon PA-12 filament are in a 1kg spool?
A standard 1,000g (1 kg) spool of 1.75mm Nylon PA-12 filament (density 1.01 g/cm³) contains approximately 411.64 meters (~1351 feet). For 2.85mm diameter, a 1 kg spool yields approximately 155.2 meters.
What is the density of Nylon PA-12 3D printer filament?
Nylon PA-12 has an average density of 1.01 g/cm³. Heavier composite filaments yield fewer meters per kilogram than lightweight unfilled polymers.
How do I calculate remaining Nylon PA-12 on a used spool?
Weigh your spool on a digital scale in grams, subtract the tare weight of the empty spool (typically 130g–240g depending on brand), and enter the net filament weight into the MakersMetric calculator above to find the exact remaining meters.
What print temperatures are recommended for Nylon PA-12?
Recommended nozzle extrusion temperature is 240-270 °C, with a recommended print bed temperature of 70-90 °C.
Calculate filament cost, kWh electricity, and machine depreciation for Nylon PA-12 jobs.
Speed TuningVolumetric Flow Rate Calculator →Check hotend melt rate limits (mm³/s) to prevent underextrusion at high speeds.