PC-ABS Alloy Weight to Length Calculator
Polycarbonate and ABS copolymer alloy delivering high impact resistance at cryogenic temperatures and heat deflection up to 110°C for automotive components.
PC-ABS Alloy Technical Specifications
PC-ABS Alloy Spool Weight to Length Reference Table
Pre-calculatedStandard physical spool conversions for PC-ABS Alloy at 1.15 g/cm³ density.
| Spool Weight | 1.75mm Length (m) | 1.75mm Length (ft) |
|---|---|---|
| 100 g (100g) | 36.15 m | 118.6 ft |
| 250 g (250g) | 90.38 m | 296.5 ft |
| 500 g (500g) | 180.76 m | 593 ft |
| 750 g (750g) | 271.14 m | 889.6 ft |
| 1000 g (1 kg) | 361.52 m | 1186.1 ft |
| 2500 g (2.5 kg) | 903.81 m | 2965.3 ft |
| 5000 g (5 kg) | 1807.62 m | 5930.5 ft |
Frequently Asked Questions
How many meters of PC-ABS Alloy filament are in a 1kg spool?
A standard 1,000g (1 kg) spool of 1.75mm PC-ABS Alloy filament (density 1.15 g/cm³) contains approximately 361.52 meters (~1186 feet). For 2.85mm diameter, a 1 kg spool yields approximately 136.31 meters.
What is the density of PC-ABS Alloy 3D printer filament?
PC-ABS Alloy has an average density of 1.15 g/cm³. Heavier composite filaments yield fewer meters per kilogram than lightweight unfilled polymers.
How do I calculate remaining PC-ABS Alloy on a used spool?
Weigh your spool on a digital scale in grams, subtract the tare weight of the empty spool (typically 130g–240g depending on brand), and enter the net filament weight into the MakersMetric calculator above to find the exact remaining meters.
What print temperatures are recommended for PC-ABS Alloy?
Recommended nozzle extrusion temperature is 260-285 °C, with a recommended print bed temperature of 100-115 °C.
Calculate filament cost, kWh electricity, and machine depreciation for PC-ABS Alloy jobs.
Speed TuningVolumetric Flow Rate Calculator →Check hotend melt rate limits (mm³/s) to prevent underextrusion at high speeds.