PC-CF (Carbon Fiber Polycarbonate) Weight to Length Calculator
Ultra-rigid composite blending polycarbonate with carbon fibers, offering 140°C heat deflection and superior dimensional stability under load.
PC-CF (Carbon Fiber Polycarbonate) Technical Specifications
PC-CF (Carbon Fiber Polycarbonate) Spool Weight to Length Reference Table
Pre-calculatedStandard physical spool conversions for PC-CF (Carbon Fiber Polycarbonate) at 1.25 g/cm³ density.
| Spool Weight | 1.75mm Length (m) | 1.75mm Length (ft) |
|---|---|---|
| 100 g (100g) | 33.26 m | 109.1 ft |
| 250 g (250g) | 83.15 m | 272.8 ft |
| 500 g (500g) | 166.3 m | 545.6 ft |
| 750 g (750g) | 249.45 m | 818.4 ft |
| 1000 g (1 kg) | 332.6 m | 1091.2 ft |
| 2500 g (2.5 kg) | 831.5 m | 2728 ft |
| 5000 g (5 kg) | 1663.01 m | 5456.1 ft |
Frequently Asked Questions
How many meters of PC-CF (Carbon Fiber Polycarbonate) filament are in a 1kg spool?
A standard 1,000g (1 kg) spool of 1.75mm PC-CF (Carbon Fiber Polycarbonate) filament (density 1.25 g/cm³) contains approximately 332.6 meters (~1091 feet). For 2.85mm diameter, a 1 kg spool yields approximately 125.4 meters.
What is the density of PC-CF (Carbon Fiber Polycarbonate) 3D printer filament?
PC-CF (Carbon Fiber Polycarbonate) has an average density of 1.25 g/cm³. Heavier composite filaments yield fewer meters per kilogram than lightweight unfilled polymers.
How do I calculate remaining PC-CF (Carbon Fiber Polycarbonate) on a used spool?
Weigh your spool on a digital scale in grams, subtract the tare weight of the empty spool (typically 130g–240g depending on brand), and enter the net filament weight into the MakersMetric calculator above to find the exact remaining meters.
What print temperatures are recommended for PC-CF (Carbon Fiber Polycarbonate)?
Recommended nozzle extrusion temperature is 270-305 °C, with a recommended print bed temperature of 100-120 °C.
Calculate filament cost, kWh electricity, and machine depreciation for PC-CF (Carbon Fiber Polycarbonate) jobs.
Speed TuningVolumetric Flow Rate Calculator →Check hotend melt rate limits (mm³/s) to prevent underextrusion at high speeds.